iRobot Scooba 400 Series Vacuum Cleaner Manual

The iRobot Scooba 400 Series is a robotic floor cleaner designed to wash hard floors. It features advanced cleaning technology, including a three-stage cleaning process that scrubs, washes, and dries your floors. With its compact design, it can easily navigate around furniture and reach corners. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Scooba 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Advanced cleaning system, rechargeable battery, easy-to-use controls, and compact design for maneuverability.

Feature	Description
Three-stage cleaning process	Scrubs, washes, and dries hard floors
Rechargeable battery	Provides up to 60 minutes of cleaning time
Compact design	Easily navigates around furniture and tight spaces
Easy-to-use controls	Simple buttons for operation and scheduling

Installation

Unpack and inspect contents. Place the Scooba on a flat surface.

Charge the battery: Connect the charging dock to a power outlet.
Place the Scooba on the dock: Ensure it aligns correctly for charging.
Fill the water tank: Use clean water and Scooba cleaning solution.

WARNING! Ensure the area is clear of obstacles before operation.

First-Time Setup

Power on the Scooba; follow the on-screen prompts.

Set cleaning schedule: Use the scheduling feature to set preferred cleaning times.
Adjust cleaning settings: Choose between different cleaning modes.
Test run: Perform a test run to ensure proper operation.

CAUTION! Ensure the battery is fully charged before first use.

Specifications

Model: Scooba 400 Series.
Cleaning Method: Three-stage cleaning process.
Battery: Rechargeable lithium-ion.
Run Time: Up to 60 minutes on a full charge.
Dimensions: 13.2 x 13.2 x 3.5 inches.
Weight: 7.5 lbs.
Water Tank Capacity: 0.5 liters.

Controls and Settings

Access the control panel for operation settings. Features include power button, cleaning mode selection, and scheduling options.

Remote: Not applicable; controlled via onboard buttons.

Connecting Devices

No external devices are required for operation; however, ensure the charging dock is connected to a power source.

Operating the Scooba

To start cleaning, press the power button and select the desired cleaning mode.

Press the power button to turn on.
Select cleaning mode: Standard or Quick Clean.
Press start to begin the cleaning cycle.

WARNING! Do not obstruct the Scooba during operation.

Maintenance and Care

Regularly clean the brushes and filter to maintain optimal performance.

CAUTION! Always unplug the charging dock before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Scooba does not start	Battery not charged	Ensure Scooba is on the charging dock.
No water dispensed	Water tank empty	Refill the water tank.
Cleaning performance poor	Brushes clogged	Clean brushes and filter.
Navigation issues	Obstacles in the way	Clear the area of obstacles.

Service: For support, contact iRobot customer service.