iRobot Scooba 380 Vacuum Cleaner Manual

The iRobot Scooba 380 is a robotic floor cleaner designed to wash hard floors. It features advanced cleaning technology, including a three-stage cleaning process that scrubs, washes, and dries your floors. The Scooba 380 is equipped with a rechargeable battery, a large water tank, and a variety of sensors to navigate around your home. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Scooba 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Advanced cleaning technology, rechargeable battery, large water tank, navigation sensors, and user-friendly controls.

Feature	Description
Three-stage cleaning process	Scrubs, washes, and dries hard floors
Rechargeable battery	Provides up to 60 minutes of cleaning time
Large water tank	Holds enough water for multiple cleaning cycles
Navigation sensors	Helps avoid obstacles and navigate around furniture
Easy-to-use controls	Simple buttons for starting and stopping cleaning

Installation

Unpack the Scooba and inspect contents. Place on a flat surface.

Charge the battery: Connect the charging dock to a power outlet.
Fill the water tank: Use clean water and the recommended cleaning solution.
Place the Scooba on the dock to charge before first use.

WARNING! Ensure the cleaning area is free of obstacles before starting.

First-Time Setup

Power on the Scooba; follow on-screen prompts.

Set cleaning mode: Choose between different cleaning modes based on your needs.
Schedule cleaning: Use the scheduling feature to set specific cleaning times.
Test run: Perform a test run to ensure proper operation.

CAUTION! Ensure the area is clear of small objects that could obstruct cleaning.

Specifications

Model: Scooba 380.
Battery: Rechargeable Lithium-ion.
Cleaning Time: Up to 60 minutes.
Water Tank Capacity: 1.5 liters.
Weight: 3.6 kg.
Dimensions: 33 x 33 x 10 cm.
Operating Temperature: 0°C to 40°C.

Controls and Settings

Access settings via the control panel. Front Panel: Power, Clean, Spot, and Dock buttons.

Remote: Start, Stop, Schedule, and Mode selection buttons.

Cleaning modes: Standard, Quick, and Spot cleaning options available.

Connecting Devices

Charging Dock: Connect to a power outlet for charging. No additional devices required.

Ensure the dock is plugged in before placing the Scooba on it.
Check for proper alignment when placing the Scooba on the dock.

Tip: Keep the dock in a central location for optimal cleaning coverage.

Operating the Scooba

To start cleaning, press the Clean button. The Scooba will navigate and clean the designated area.

Press Clean to start the cleaning cycle.
Monitor the cleaning process via the indicator lights.
Press Dock to return the Scooba to the charging station.

WARNING! Do not block the Scooba while it is cleaning.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the brushes and filters regularly.

Empty the water tank after each use.
Clean the brushes and remove any hair or debris.
Replace filters as recommended in the user manual.

CAUTION! Always unplug the charging dock before cleaning.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Scooba does not start	Battery not charged	Place Scooba on the charging dock and charge for at least 2 hours.
No water dispensed	Water tank empty	Refill the water tank with clean water and cleaning solution.
Cleaning not effective	Brushes dirty	Clean the brushes and check for blockages.
Scooba gets stuck	Obstacles in the way	Clear the area of obstacles and restart the cleaning cycle.

Reset: Press and hold the Clean button for 10 seconds to reset.

Service: For support, contact iRobot customer service.