iRobot Scooba 350 Vacuum Cleaner Manual

The iRobot Scooba 350 is a robotic floor cleaner designed to wash hard floors. It features advanced cleaning technology, including a three-stage cleaning process that scrubs, sweeps, and squeegees your floors. The Scooba 350 is equipped with a rechargeable battery, a water tank, and a dirty water tank, making it efficient for cleaning various surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Cleaning Process 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Robotic design, three-stage cleaning process, rechargeable battery, water and dirty water tanks.

Feature	Description
Three-stage cleaning	Scrubs, sweeps, and squeegees floors for thorough cleaning
Rechargeable battery	Provides up to 60 minutes of cleaning time
Water tank	Holds clean water for the cleaning process
Dirty water tank	Collects dirty water after cleaning
Virtual wall	Prevents the robot from entering certain areas
Easy maintenance	Simple to clean and maintain for optimal performance

Installation

Unpack and inspect contents. Place the charging station on a flat surface near an outlet.

Connect the charging station to a power outlet.
Ensure the area is clear of obstacles for the robot to navigate.
Charge the Scooba 350 for at least 16 hours before first use.

WARNING! Ensure the charging station is not obstructed to avoid charging issues.

First-Time Setup

Power on the Scooba 350; follow the on-screen prompts.

Fill the water tank with clean water and cleaning solution.
Place the robot on the charging station to charge.
Press the CLEAN button to start the cleaning cycle.

CAUTION! Ensure the water tank is securely attached before use.

Specifications

Cleaning Method: Three-stage cleaning process.
Battery: Rechargeable lithium-ion battery.
Run Time: Up to 60 minutes on a full charge.
Water Tank Capacity: 0.5 liters.
Dimensions: 13.5 x 13.5 x 3.5 inches.
Weight: 7.5 lbs.
Operating Temperature: 32°F to 104°F.

Controls and Settings

Access settings via the control panel on the robot. Key buttons include CLEAN, SPOT, and DOCK.

Remote: Optional remote control for manual operation.

Settings include scheduling, cleaning modes, and battery status.

Connecting Devices

Charging station: Connect to a power outlet. No additional devices required for operation.

Ensure the charging station is plugged in and functional.
Place the Scooba 350 on the charging station to charge.

Tip: Keep the charging station in a clear area for optimal performance.

Cleaning Process

The Scooba 350 uses a three-stage cleaning process to effectively clean hard floors.

Scrubbing: The robot scrubs the floor with a rotating brush.
Sweeping: It sweeps debris into the dirty water tank.
Squeegeeing: The robot squeegees the floor to remove excess water.

WARNING! Ensure the floor is free of large debris before cleaning.

Maintenance

Regular maintenance is essential for optimal performance.

Empty the dirty water tank after each use.
Clean the brushes and filters regularly.
Check for blockages in the water tank and hoses.

CAUTION! Always unplug the charging station before performing maintenance.

Care & Cleaning

Unplug the charging station before cleaning. Use a dry cloth to wipe the robot; avoid liquids.

CAUTION! Do not immerse the robot in water; keep away from heat and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2023 iRobot; trademarks of iRobot Corporation. For support, visit www.irobot.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot does not charge	Power outlet issue	Check the outlet and charging station connection.
No water dispensed	Water tank empty	Refill the water tank with clean water.
Robot not cleaning	Brushes clogged	Clean the brushes and check for blockages.
Robot stuck	Obstacles in the way	Remove obstacles and restart the robot.
Battery not holding charge	Old battery	Replace the battery if it no longer holds a charge.

Reset: Press and hold the CLEAN button for 10 seconds to reset.

Service: For support, visit www.irobot.com or contact customer service.