iRobot Scooba 230 Vacuum Cleaner Manual

The iRobot Scooba 230 is a compact robotic floor cleaner designed to wash hard floors. It features advanced cleaning technology, including a dual-mode cleaning system, a built-in water tank, and a powerful battery for extended cleaning sessions. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact design, dual-mode cleaning system, built-in water tank, rechargeable battery, and easy-to-use controls.

Feature	Description
Dual-Mode Cleaning	Choose between wet mopping and damp mopping modes.
Built-in Water Tank	Holds enough water for multiple cleaning cycles.
Rechargeable Battery	Provides up to 40 minutes of cleaning time.
Compact Design	Easily navigates under furniture and tight spaces.
Easy Controls	Simple buttons for starting and stopping cleaning.

Installation

Unpack and inspect contents. Place the Scooba on a flat surface.

Charge the battery: Connect the charging station and place the Scooba on it.
Fill the water tank: Use clean water and the recommended cleaning solution.
Set up the cleaning area: Clear any obstacles from the floor.

WARNING! Ensure the area is free of loose items to avoid damage.

First-Time Setup

Power on the Scooba; follow the on-screen prompts.

Charge the battery fully before first use.
Fill the water tank with the appropriate solution.
Press the clean button to start the first cleaning cycle.

CAUTION! Ensure the water tank is securely attached before use.

Specifications

Model: Scooba 230.
Cleaning Modes: Wet mopping, damp mopping.
Battery Life: Up to 40 minutes.
Water Tank Capacity: 0.5 liters.
Dimensions: 10.5 inches diameter, 3.5 inches height.
Weight: 5.5 lbs.
Power Source: Rechargeable battery.

Controls and Settings

Access cleaning modes via the control panel. Buttons include Clean, Spot, and Dock.

Remote: Optional remote control for manual operation.

Settings: Adjust cleaning modes and schedule cleaning times.

Connecting Devices

Charging Station: Connect to a power outlet for charging.

Ensure the charging station is plugged in.
Place the Scooba on the charging station to charge.

Tip: Keep the charging station in a clear area for easy access.

Cleaning Modes

Choose between wet and damp cleaning modes based on your floor type.

Wet Mode: For deep cleaning with water and solution.
Damp Mode: For light cleaning and maintenance.

WARNING! Do not use on carpets or rugs.

Maintenance

Regularly clean the brushes and filter for optimal performance.

Remove and rinse the brushes under water.
Check the filter and replace if necessary.

CAUTION! Ensure the Scooba is turned off before maintenance.

Care & Cleaning

Unplug the charging station before cleaning. Use a damp cloth to clean the exterior.

CAUTION! Do not immerse the Scooba in water.

Regulatory Information

This device complies with FCC Part 15. For support, visit www.irobot.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Scooba not charging	Power outlet issue	Check outlet and connections.
No water dispensed	Empty water tank	Refill water tank.
Cleaning not effective	Dirty brushes	Clean or replace brushes.
Battery not lasting	Old battery	Replace battery if necessary.

Reset: Press and hold the Clean button for 10 seconds.

Service: Visit www.irobot.com for support.