iRobot SCOOBA 385 Vacuum Cleaner Manual

The iRobot SCOOBA 385 is a robotic floor cleaner designed to wash hard floors. It features advanced cleaning technology, including a three-stage cleaning system that scrubs, washes, and dries your floors. The SCOOBA 385 is equipped with a rechargeable battery, a large water tank, and smart navigation to efficiently clean your home. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the SCOOBA 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced cleaning technology, rechargeable battery, large water tank, smart navigation.

Feature	Description
Three-stage cleaning system	Scrubs, washes, and dries floors
Rechargeable battery	Provides up to 60 minutes of cleaning time
Large water tank	Holds enough water for multiple cleaning cycles
Smart navigation	Efficiently maps and cleans your home
Easy-to-use controls	Simple buttons for operation

Installation

Unpack and inspect contents. Place the SCOOBA on a flat surface.

Charge the battery: Connect the charging dock to a power outlet.
Fill the water tank: Use clean water and the recommended cleaning solution.
Place the SCOOBA on the dock to charge before first use.

WARNING! Ensure the charging dock is in a dry area to avoid electrical hazards.

First-Time Setup

Power on the SCOOBA; follow on-screen prompts.

Set cleaning schedule: Use the onboard controls to set your preferred cleaning times.
Test run: Allow the SCOOBA to perform a test cleaning cycle.
Adjust settings: Customize cleaning modes as needed.

CAUTION! Ensure the area is clear of obstacles before starting.

Specifications

Model: iRobot SCOOBA 385.
Cleaning System: Three-stage cleaning process.
Battery: Rechargeable lithium-ion battery.
Run Time: Up to 60 minutes.
Water Tank Capacity: 1.5 liters.
Weight: 8.5 lbs.
Dimensions: 13.9 x 13.9 x 3.5 inches.

Controls and Settings

Access controls via the top panel. Features include power button, cleaning mode selection, and scheduling options.

Remote: Optional remote control for manual operation.

Cleaning modes: Standard, Quick Clean, and Spot Clean.

Connecting Devices

No external devices are required for operation. Ensure the SCOOBA is charged and ready for use.

Place the SCOOBA on the charging dock when not in use.
Ensure the dock is plugged into a power outlet.

Tip: Regularly check the water tank and cleaning solution levels.

Operating the SCOOBA

To start cleaning, press the power button and select your desired cleaning mode.

Press the power button to turn on.
Select the cleaning mode.
Press start to begin the cleaning cycle.

WARNING! Do not block the SCOOBA during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the brushes and filter after each use.

CAUTION! Unplug the charging dock before cleaning.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. For support, visit www.irobot.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
SCOOBA does not start	Battery not charged	Place on charging dock and charge for at least 2 hours.
No water dispensed	Water tank empty	Refill the water tank with clean water and solution.
Brushes not spinning	Blocked brushes	Check for debris and clean brushes.
Cleaning cycle incomplete	Battery low	Charge the battery and restart the cleaning cycle.

Reset: Refer to the user manual for reset instructions.

Service: For support, visit www.irobot.com or contact customer service.