iRobot Roomba Discovery Series 400 Series Vacuum Cleaner manual

The iRobot Roomba Discovery Series 400 is an advanced robotic vacuum cleaner designed to autonomously clean your home. It features a three-stage cleaning system, including agitation, brushing, and suction, to effectively remove dirt, dust, and pet hair from various floor types. The Roomba is equipped with intelligent sensors to navigate around furniture and avoid obstacles, ensuring thorough cleaning without human intervention. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Advanced sensors, three-stage cleaning system, automatic docking and recharging, virtual wall technology, and remote control.

FeatureDescription
Three-stage cleaning systemAgitates, brushes, and suctions dirt and debris
Intelligent sensorsNavigates around furniture and avoids obstacles
Automatic dockingReturns to charging station when battery is low
Virtual wall technologyCreates invisible barriers to restrict cleaning areas
Remote controlAllows manual operation from a distance

Installation

Unpack and inspect contents. Place the charging dock in a clear area.

  1. Connect the charging dock to a power outlet.
  2. Ensure the area around the dock is free of obstacles.
  3. Charge the Roomba for at least 16 hours before first use.

WARNING! Keep the charging dock away from water and heat sources.

First-Time Setup

Power on the Roomba; follow the voice prompts.

  1. Press the CLEAN button to start the initial cleaning cycle.
  2. Set the clock and schedule cleaning times if desired.
  3. Familiarize yourself with the remote control functions.

CAUTION! Ensure the area is clear of small objects before starting.

Specifications

Controls and Settings

Access settings via the remote control or the Roomba's onboard buttons. Key functions include CLEAN, SPOT, DOCK, and SCHEDULE.

Remote: Use the remote to start, stop, or schedule cleaning sessions.

Connecting Devices

The Roomba does not require direct connections to other devices but can be controlled via a remote.

  1. Ensure the remote is paired with the Roomba if applicable.
  2. Replace batteries in the remote as needed.

Tip: Keep the remote within range for optimal control.

Cleaning Modes

The Roomba offers various cleaning modes, including Auto, Spot, and Scheduled cleaning.

  1. Auto mode: Cleans the entire area.
  2. Spot mode: Cleans a specific area in a spiral pattern.
  3. Scheduled mode: Cleans at preset times.

Maintenance

Regular maintenance is essential for optimal performance.

  1. Empty the dustbin after each use.
  2. Clean the brushes and sensors weekly.
  3. Replace filters every 2-3 months.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth to clean the Roomba's exterior.

CAUTION! Do not immerse the Roomba in water or use liquid cleaners.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

SymptomPossible CauseCorrective Action
Roomba does not startBattery issueCheck battery charge; replace if necessary.
No suctionClogged filterClean or replace the filter.
Roomba gets stuckObstacles in the wayClear the area of obstacles.
Remote not workingBattery issueReplace remote batteries.

Reset: Press and hold the CLEAN button for 10 seconds to reset.

Service: For support, visit www.irobot.com or contact customer service.

iRobot Roomba Discovery Series 400 Series Vacuum Cleaner manual © - All Rights Reserved 2026