iRobot Roomba 572 Vacuum Cleaner Manual

The iRobot Roomba 572 is an advanced robotic vacuum cleaner designed to efficiently clean your home. It features a three-stage cleaning system, including dual multi-surface brushes, a powerful suction, and a patented dirt detection technology. The Roomba 572 is equipped with a virtual wall barrier, scheduling capabilities, and a compact design that allows it to navigate under furniture and around obstacles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Roomba 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Three-stage cleaning system, dual multi-surface brushes, dirt detection technology, virtual wall barrier, scheduling capabilities.

Feature	Description
Three-stage cleaning system	Cleans carpets, hardwood, and tile floors effectively
Dirt detection technology	Identifies areas that need more attention
Virtual wall barrier	Prevents Roomba from entering certain areas
Scheduling capabilities	Allows you to set cleaning times
Compact design	Can navigate under furniture and around obstacles

Installation

Unpack and inspect contents. Place the charging dock in a clear area.

Connect the charging dock: Plug it into a wall outlet.
Ensure the area is clear: Remove any obstacles around the dock.
Charge the Roomba: Place it on the dock until fully charged.

WARNING! Ensure the charging dock is in a dry area; avoid moisture.

First-Time Setup

Power on the Roomba; follow the voice prompts.

Set the clock: Use the buttons on the Roomba to set the current time.
Schedule cleaning: Press the schedule button to set cleaning times.
Test run: Start a cleaning cycle to ensure proper operation.

CAUTION! Ensure the area is clear of small objects before starting.

Specifications

Model: iRobot Roomba 572.
Cleaning System: Three-stage cleaning system.
Battery: Rechargeable lithium-ion battery.
Run Time: Up to 90 minutes on a single charge.
Dimensions: 13.9 x 13.9 x 3.6 inches.
Weight: 7.8 lbs.
Noise Level: 60 dB.
Warranty: 1-year limited warranty.

Controls and Settings

Access settings via the buttons on the Roomba. Key controls include CLEAN, DOCK, SPOT, and SCHEDULE.

Remote: Optional remote control for additional convenience.

Settings include scheduling, cleaning modes, and volume control for voice prompts.

Connecting Devices

Charging dock: Connects to a standard wall outlet. Optional remote control: Uses infrared signals.

Ensure the Roomba is charged before first use.
Follow instructions for remote pairing if applicable.

Tip: Keep the charging dock in an accessible location for easy docking.

Operating the Roomba

To start cleaning, press the CLEAN button. The Roomba will automatically navigate and clean the area.

Press CLEAN to start.
Use SPOT for targeted cleaning in a specific area.
Press DOCK to return to the charging dock.

WARNING! Do not block the Roomba's path during operation.

Maintenance and Care

Regularly clean the brushes and filter to maintain performance. Replace the filter every 2-3 months.

CAUTION! Always turn off and unplug before performing maintenance.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Roomba does not start	Battery is dead	Charge the Roomba for at least 3 hours.
Brushes not spinning	Blocked or tangled	Remove debris and clean brushes.
No suction	Full dustbin	Empty the dustbin and clean the filter.
Roomba not docking	Dock is blocked	Ensure the docking station is clear of obstacles.

Reset: Press and hold the CLEAN button for 10 seconds to reset.

Service: For support, contact iRobot customer service.