iRobot Roomba 570 Vacuum Cleaner Manual

The iRobot Roomba 570 is a robotic vacuum cleaner designed to autonomously clean your floors. It features advanced navigation technology, a three-stage cleaning system, and a variety of sensors to detect dirt and obstacles. The Roomba 570 is equipped with a rechargeable battery, allowing it to clean for up to 90 minutes on a single charge. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting the Dock 7. Cleaning Modes 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Advanced navigation, three-stage cleaning system, virtual wall barriers, and a HEPA filter for allergens.

FeatureDescription
Advanced NavigationUses sensors to navigate around furniture and avoid obstacles.
Three-Stage Cleaning SystemLoosens, lifts, and suctions dirt and debris from floors.
Virtual Wall BarriersCreates invisible barriers to keep Roomba in designated areas.
HEPA FilterCaptures allergens and fine dust particles.
Rechargeable BatteryProvides up to 90 minutes of cleaning time.
SchedulingAllows you to set cleaning times for automatic operation.

Installation

Unpack the Roomba and its accessories. Place the Home Base on a flat surface near a power outlet.

  1. Connect the Home Base to a power outlet.
  2. Ensure the area is clear of obstacles for optimal navigation.
  3. Charge the Roomba for at least 3 hours before first use.

WARNING! Keep the charging area clear to avoid interference with the Roomba's docking.

First-Time Setup

Power on the Roomba; follow the voice prompts for setup.

  1. Press the CLEAN button to start the initial cleaning cycle.
  2. Set the clock and schedule cleaning times using the buttons on the Roomba.
  3. Familiarize yourself with the remote control for manual operation.

CAUTION! Ensure the Roomba is on a flat surface during setup.

Specifications

Controls and Settings

Access settings via the buttons on the Roomba or the remote control. Key controls include CLEAN, SPOT, DOCK, and scheduling options.

Remote: Use the remote to start, stop, or schedule cleaning sessions.

Connecting the Dock

Place the Home Base in an area with easy access to power and clear space around it.

  1. Ensure the Roomba is charged before first use.
  2. Press the DOCK button to return the Roomba to the Home Base.

Tip: Keep the Home Base away from stairs and high-traffic areas.

Cleaning Modes

The Roomba offers multiple cleaning modes including AUTO, SPOT, and SCHEDULED cleaning.

  1. AUTO: Cleans the entire area.
  2. SPOT: Cleans a small, specific area.
  3. SCHEDULED: Cleans at set times.

Maintenance

Regular maintenance is essential for optimal performance. Clean the brushes and empty the bin after each use.

CAUTION! Always turn off the Roomba before performing maintenance.

Troubleshooting

SymptomPossible CauseCorrective Action
Roomba does not startBattery issueCheck battery charge; replace if necessary.
No suctionDirty filterClean or replace the filter.
Roomba gets stuckObstaclesClear obstacles from the cleaning path.
Remote not workingBatteriesReplace remote batteries.

Reset: Press and hold the CLEAN button for 10 seconds to reset.

iRobot Roomba 570 Vacuum Cleaner Manual © - All Rights Reserved 2026