iRobot RVE-Y2 Vacuum Cleaner Manual

The iRobot RVE-Y2 is a state-of-the-art robotic vacuum cleaner designed to simplify your cleaning routine. With advanced navigation technology, powerful suction, and smart features, it efficiently cleans various floor types, including carpets and hard floors. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to the App 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Smart navigation, powerful suction, multiple cleaning modes, Wi-Fi connectivity, and a user-friendly app.

Feature	Description
Smart Navigation	Maps your home for efficient cleaning paths
Powerful Suction	Adjusts suction power based on floor type
Multiple Cleaning Modes	Includes auto, spot, and edge cleaning modes
Wi-Fi Connectivity	Control and schedule cleaning via smartphone app
HEPA Filter	Captures allergens and fine dust particles
Recharge and Resume	Automatically returns to charging dock when low on battery
Virtual Wall	Prevents the vacuum from entering certain areas

Installation

Unpack and inspect contents. Place the charging dock in a central location.

Connect the charging dock to a power outlet.
Ensure the dock is clear of obstacles for easy access.
Place the vacuum on the dock to charge before first use.

WARNING! Ensure the vacuum is turned off during installation.

First-Time Setup

Power on the vacuum; follow the app prompts for setup.

Download the iRobot app from your app store.
Create an account or log in.
Connect the vacuum to your Wi-Fi network via the app.
Set cleaning schedules and preferences through the app.

CAUTION! Ensure the vacuum is fully charged before first use.

Specifications

Model: iRobot RVE-Y2
Battery Type: Lithium-ion
Run Time: Up to 90 minutes
Charging Time: Approximately 3 hours
Weight: 7.5 lbs
Dimensions: 13.4 x 13.4 x 3.6 inches
Dustbin Capacity: 0.5 liters
Filter Type: HEPA

Controls and Settings

Access settings via the iRobot app or the physical buttons on the vacuum.

Buttons: Clean, Home, Spot Clean, and Power.

Settings: Adjust cleaning schedules, modes, and preferences through the app.

Connecting to the App

Ensure your smartphone is connected to the same Wi-Fi network as the vacuum.

Open the iRobot app and log in.
Select "Add a Robot" and follow the prompts.
Ensure the vacuum is powered on and within range of the Wi-Fi.

Tip: Keep the app updated for the best performance.

Cleaning Modes

The vacuum offers various cleaning modes to suit different needs.

Auto Mode: For general cleaning of the entire area.
Spot Mode: For concentrated cleaning of a specific area.
Edge Mode: For cleaning along walls and corners.

WARNING! Always ensure the area is clear of obstacles before starting.

Maintenance

Regular maintenance ensures optimal performance.

Empty the dustbin after each use.
Clean the filter monthly; replace as needed.
Check and clean the brushes regularly.

CAUTION! Always turn off the vacuum before performing maintenance.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth to wipe the vacuum.

CAUTION! Do not use liquids or aerosols on the vacuum.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2026 iRobot; trademarks of iRobot Corporation. For support, visit www.irobot.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum does not start	Battery issue	Ensure vacuum is charged; check connections.
No suction	Clogged filter	Clean or replace the filter; empty dustbin.
Navigation issues	Obstacles in the way	Clear the area of obstacles; reset the vacuum.
App connection problems	Wi-Fi issues	Check Wi-Fi connection; restart the vacuum and app.

Reset: Use the app to reset settings if needed.

Service: 1-877-IRobot; www.irobot.com