iRobot R11384 Vacuum Cleaner Manual

The iRobot R11384 is a robotic vacuum cleaner designed to efficiently clean your home with minimal effort. It features advanced navigation technology, powerful suction, and a variety of cleaning modes to ensure thorough cleaning on different surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Cleaning Modes 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Smart navigation, powerful suction, multiple cleaning modes, and a user-friendly app for remote control.

Feature	Description
Smart Navigation	Uses sensors to navigate around furniture and obstacles.
Powerful Suction	Designed to pick up dirt, dust, and pet hair effectively.
Multiple Cleaning Modes	Includes auto, spot, and edge cleaning modes.
Wi-Fi Connectivity	Control and schedule cleaning via a mobile app.
Recharge and Resume	Automatically returns to charging dock when battery is low.

Installation

Unbox the vacuum cleaner and ensure all components are included. Place the charging dock in a clear area.

Connect the charging dock to a power outlet.
Ensure the vacuum is fully charged before first use.
Download the iRobot app to connect your vacuum to Wi-Fi.

WARNING! Keep the charging dock away from water and ensure it is on a flat surface.

First-Time Setup

Power on the vacuum and follow the app instructions to connect to Wi-Fi.

Open the iRobot app and create an account or log in.
Follow the prompts to connect your vacuum to your home Wi-Fi.
Set your cleaning schedule through the app.

CAUTION! Ensure the vacuum is on a stable surface during setup.

Specifications

Model: iRobot R11384.
Battery Type: Lithium-ion.
Run Time: Up to 90 minutes on a full charge.
Charging Time: Approximately 3 hours.
Weight: 7.8 lbs.
Dimensions: 13.4 x 13.4 x 3.6 inches.
Dustbin Capacity: 0.5 liters.
Connectivity: Wi-Fi enabled.

Controls and Settings

Access settings via the iRobot app or use the physical buttons on the vacuum.

Buttons: Clean, Dock, and Spot Clean.

Settings: Adjust cleaning schedules, modes, and notifications through the app.

Connecting to Wi-Fi

Ensure your vacuum is within range of your Wi-Fi network.

Open the iRobot app and select 'Add a Robot'.
Follow the on-screen instructions to connect to your Wi-Fi.
Test the connection by starting a cleaning cycle from the app.

Tip: Keep your router in an open area for better connectivity.

Cleaning Modes

The vacuum offers various cleaning modes for different needs.

Auto Mode: For general cleaning of large areas.
Spot Mode: For concentrated cleaning in a small area.
Edge Mode: For cleaning along walls and corners.

WARNING! Do not use the vacuum on wet surfaces.

Maintenance

Regular maintenance is essential for optimal performance.

Empty the dustbin after each use.
Clean the brushes and filters regularly.
Check for any blockages in the vacuum.

CAUTION! Always turn off the vacuum before performing maintenance.

Regulatory Information

This device complies with FCC rules and regulations. For support, visit www.irobot.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum won't start	Battery issue	Check if the vacuum is charged; replace battery if necessary.
No suction	Clogged filter	Clean or replace the filter; empty the dustbin.
Stuck on obstacle	Navigation error	Clear the area; restart the vacuum.
Wi-Fi connection issues	Network problems	Restart the router; reconnect the vacuum to Wi-Fi.

Reset: Use the app to reset settings if needed.

Service: 1-800-727-9077; www.irobot.com