iRobot Braava Jet m6 Vacuum Cleaner Manual

The iRobot Braava Jet m6 is a smart robotic mop designed to tackle dirt and stains on hard floors. With advanced navigation technology, it efficiently cleans your home while avoiding obstacles. It features a powerful cleaning system, customizable cleaning modes, and is compatible with the iRobot HOME app for remote control and scheduling. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Cleaning Modes 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Smart navigation, powerful cleaning system, customizable cleaning modes, and app integration.

Feature	Description
Smart Navigation	Maps your home for efficient cleaning paths
Customizable Cleaning Modes	Choose from different cleaning modes based on your needs
iRobot HOME App	Control and schedule cleaning from your smartphone
Recharge and Resume	Automatically returns to charging dock and resumes cleaning
Washable Cleaning Pads	Reusable pads for eco-friendly cleaning

Installation

Unpack and inspect contents. Place the charging dock in a suitable location.

Connect the charging dock to a power outlet.
Ensure the area around the dock is clear of obstacles.
Charge the robot for at least 2 hours before first use.

WARNING! Keep the charging dock away from water and heat sources.

First-Time Setup

Power on the robot; follow the app instructions for setup.

Download the iRobot HOME app from your app store.
Create an account or log in.
Follow the prompts to connect the robot to Wi-Fi.
Customize your cleaning preferences in the app.

CAUTION! Ensure the robot is on a flat surface during setup.

Specifications

Model: Braava Jet m6.
Battery: Lithium-ion, rechargeable.
Cleaning Coverage: Up to 1,000 square feet.
Water Tank Capacity: 300 ml.
Weight: 2.5 kg.
Dimensions: 9.1 x 10.5 x 3.1 inches.
Connectivity: Wi-Fi (2.4 GHz).

Controls and Settings

Access settings via the iRobot HOME app. Manual controls are available on the robot.

Buttons: Clean, Home, Spot Clean, Power.

Settings include cleaning schedules, mode selection, and maintenance reminders.

Connecting to Wi-Fi

Ensure your Wi-Fi network is active and within range.

Open the iRobot HOME app and select your robot.
Follow the prompts to connect to your Wi-Fi network.
Ensure the robot is within range of the Wi-Fi signal.

Tip: Use a 2.4 GHz network for better connectivity.

Cleaning Modes

Choose from various cleaning modes based on your needs.

Standard Cleaning: For everyday cleaning tasks.
Spot Cleaning: For targeted cleaning in small areas.
Wet Mopping: For deep cleaning with a wet pad.

WARNING! Use appropriate cleaning pads for each mode.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the filter and replace it every 2 months.
Wash the cleaning pads after each use.
Check for blockages in the wheels and brushes.

CAUTION! Always unplug the charging dock before cleaning.

Regulatory Information

This device complies with FCC Part 15. For more information, visit www.irobot.com or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot not charging	Dock not connected	Ensure dock is plugged in and robot is seated properly.
No cleaning	Battery low	Charge the robot before use.
Streaks on floor	Dirty cleaning pad	Replace or wash the cleaning pad.
Wi-Fi connection issues	Weak signal	Move the dock closer to the router.
Robot stuck	Obstacles	Clear the area of obstacles and restart the robot.

Reset: Use the app to reset settings if necessary.

Service: For support, contact iRobot customer service.