iRobot Braava 380t Vacuum Cleaner Manual

The iRobot Braava 380t is a robotic mop designed to clean hard floors efficiently. It features advanced navigation technology, multiple cleaning modes, and a long-lasting battery. The Braava 380t is compatible with both wet and dry cleaning pads, making it versatile for various cleaning tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Cleaning Modes 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Advanced navigation, multiple cleaning modes, rechargeable battery, compatibility with wet and dry pads.

Feature	Description
Advanced Navigation	Smart technology to navigate around furniture and obstacles
Multiple Cleaning Modes	Choose between dry sweeping and damp mopping
Rechargeable Battery	Long-lasting battery for extended cleaning sessions
Compatibility	Works with both wet and dry cleaning pads
Compact Design	Low profile to clean under furniture easily

Installation

Unpack and inspect contents. Place the charging dock in a suitable location.

Connect the charging dock to a power outlet.
Ensure the area is clear for the robot to navigate.
Charge the robot fully before first use.

WARNING! Keep the charging dock away from water sources.

First-Time Setup

Power on the robot; follow on-screen prompts.

Set the cleaning mode: Choose between dry or wet cleaning.
Place the cleaning pad on the robot.
Press the clean button to start the cleaning cycle.

CAUTION! Ensure the robot is on a flat surface during setup.

Specifications

Model: iRobot Braava 380t.
Cleaning Modes: Dry sweeping, damp mopping.
Battery: Rechargeable lithium-ion battery.
Run Time: Up to 150 minutes on a single charge.
Dimensions: 9.8 x 9.6 x 3.1 inches.
Weight: 3.3 lbs.
Compatibility: Compatible with iRobot cleaning pads.

Controls and Settings

Access settings via the control panel on the robot. Use the clean button to start cleaning and the mode button to switch between cleaning modes.

Remote: Optional remote control for manual operation.

Connecting Devices

No external devices are required for operation. Ensure the robot is charged and ready for use.

Cleaning Modes

Select between dry sweeping and damp mopping based on your cleaning needs.

Dry Mode: For dust and dirt on hard floors.
Wet Mode: For mopping with a damp cleaning pad.

Maintenance

Regularly clean the robot's sensors and brushes. Replace cleaning pads as needed.

CAUTION! Unplug the charging dock before cleaning.

Regulatory Information

FCC compliance: This device complies with part 15 of the FCC rules. For support, visit www.irobot.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Robot does not start	Battery issue	Ensure the robot is charged.
No cleaning action	Pad not attached	Check and attach cleaning pad.
Stuck on obstacles	Navigation issue	Clear the area of obstacles.
Battery not charging	Charging dock issue	Check connections and power supply.

Reset: Press and hold the clean button for 10 seconds to reset.

Service: 1-877-855-8593; www.irobot.com